DigitByte Software for Windows, Mac, iPhone, iPad, iPod – free download
Have you ever wondered want to see a movie in 3D that you have with you computer, here is guide is about how to watch 3D movie in PC
In fact , the transformation of a 2D movie in 3D is much easier than you think, you can use a software to convert your movie into 3D format, and use a pair of special glasses, then you can watch 3D movie at home now
The software you need – MakeMe3D and Microsoft .net Framework 3.0
MakeMe3D can convert existing 2D-videos automatically into the third dimension. The new 3D-videos are compatible to the known Anaglyph 3D glasses and to the new Stereoscopic 3D Hardware.
3D is currently ‘the one’ new technique. What was hardly conceivable a few months ago has become reality long since. The audience in the cinema put on the 3D-glasses to watch movies in a completely new dimension. And a lot more is happening: the industry is busy tinkering with the 3D-Blu-ray Disc, the 3D-TV and the 3D-computer. This undoubtedly marks only the beginning of a new 3D-boom, which will keep entertainment electronics and IT-sector busy for the next ten years.
Note:
- You will get a download manager from Regnow, then use it to download this app, which is 25.02MB in size
- When you install this app, it will auto check your PC, if your PC has not installed .net Framework 3.0, it will download it automatically for you. if the downloading speed is too slow, you can download here
- MakeMe3D run under O.S.: Windows XP/Vista/7
How to create a 3D movie by using MakeMe3D
1. First of all, download MakeMe3D -> install the software, The software is trial version, which is being tested for 7 days. Tip: .net 3 Framework is needed (it will be automatically installed, if not available), .net 3 Framework is about 63MB in size.
2. After you installed MakeMe3D successfully, you can start it via ‚Start > All Programs >Engelmann Media > MakeMe3D
3. Click on “Files” to open one or more files, on “Folder” to add whole folders or on “DVD” to load a video-DVD:
- Files: Loads one or more video files into the list.
- Folder: Loads all the video files, which the selected folder contains, into the list. Activate “Subfolder” to load the video files in the contained subfolders, too.
- DVD: Reads the titles and chapters of a (non copy-protected) video-DVD and adds them to the list
After you have loaded a file or DVD, select it in the list and you will get a preview in the preview window.
4. Set 3D option: You can choose the 3D mode in the upper left corner: – Stereo Horizontal (Shutter glasses)
– Stereo Horizontal (Shutter glasses) – half width
– Stereo Vertical (Polarized glasses)
– Stereo Vertical (Polarized glasses) – half width
– Interlaced – Horizontal
– Interlaced – Vertical
– Anaglyph Yellow/Blue
– Anaglyph Yellow/Blue – black and white
– Anaglyph Red/Cyan
– Anaglyph Red/Cyan – black and white
– Anaglyph Green/Magenta
– Anaglyph Green/Magenta – black and white
– Left and right eye
5. 3D conversion, This options are used to manipulate the 3D conversion
Automatic (File type):
If you choose this option, MakeMe3D will take care of all the details like resolution, bitrate, framerate and the audio type. The following options are available:
– AVI: Video is MPEG-4-SP, Audio is MP3
– MP4: Video is AVC, Audio is AAC
– WMV: Video is WMV, Audio is WMA
The optimization and picture quality is based on the source quality.
Non automatic (Profile):
With this option, MakeMe3D offers you a whole lot of different profiles for different devices. Furthermore you can change the details by yourself with the following options:
– Quality: It is possible to vary the output quality with this control, where “Low” stands for a low quality but also a small file size and a fast conversion and “High” stands for good quality but, at the same time, a very big file size and a longer conversion time. Conclusion: If you want to use the video on a small device with even smaller space for data, use a low quality. If you don’t have this restrictions (and you own, at least, a dual core CPU), don’t be afraid to use the highest quality possible.
– Advanced: Opens a setting menu with advanced options.
6. for advanced users: After clicking on “Advanced” you can manually change different audio and video settings*. (Only available if the output is not set to “Automatic”).
7. Choose your target directory (“Output path:” – in the lower left corner) and click “Start conversion”.
8. If you do not know how to set output file’s option, you can choose “automatic conversion”
If you are using the automatic conversion, MakeMe3D offers different pre-configured settings which you can use to convert your videos:
- AVI (MPEG-4): Creates AVI files with MPEG4-SP video and MP3 audio. This setting is highly compatible to different devices, such as your PC, some mobile devices and DVD players with MPEG-4 support.
- MP4 (H.264): Creates MP4 files with AVC/H.264 (Baseline@Level 1.3) video and AAC audio. This format is used by devices like the Xbox 360, the Playstation 3 and the Playstation Portable.
- MPG (MPEG-2): Creates MPG files with MPEG-2 video and MP2 audio. This format is highly compatible with DVD players.
- WMV (WMV9): Creates WMV files with Windows Media Video and Windows Media Audio. This format is created by Microsoft and therefor compatible with most of Microsofts products.
Hint: The automatic conversion keeps such things as the frame rate and resolution from the source video. Furthermore, the settings are automatically chosen to keep the highest possible quality.
9. A simple click on “Start conversion” will start the conversion of your video files. All videos in the list will be converted with the same settings. While the program is converting, you will be informed by a progress window which displays the following:
- The current file in progress
- The target format
- The video and audio settings you made for the conversion
- The intensity of the optimization
You can enable “Shutdown computer after conversion” to automatically shutdown your PC after the conversion has finished.
You can open the windows explorer, pointing to the output path, via “Open output path”.
Done!
If you are interesting in this program, please download it from below URL, and get a free and wonderful trial!
Tips: You can use the full version of MakeMe3D for 3 days as a limited demo. You can test the software in every area during this period, only limited by the conversion time which is set to a maximum of 5 minutes.After this you need a valid license to use the program. It would give us great pleasure if our application could convince you during this period to become a new customer .